Best Rust Converter

best rust converterRust is a common phenomenon in metal equipment and materials. On this issue, the rusty converter is the most useful thing you can use.

The best rust preventive converter is a water based lacquer consisting of Tannic acid and an organic polymer.

Both can change the rust and provide a primer coating.

In order to make the product rust-free for a long time, it is necessary to use the best rust-proof converter.

If you are interested in trying out converters, check out our list and the short discussion below.

  • Tips: If the vehicle has a long service life, then there will be many problems, such as rusting the chassis and failure to start due to lack of electricity, so you should put Jumper Cables in your trunk.

5 Best Rust Converters List:

VHT SP229Dimensions: 2.7 x 2.7 x 8 in
Weight: 13.6 ounces
Corroseal 82331Dimensions: 12.3 x 5.7 x 5.6 in
Weight: 10 pounds
KRUD KUTTER MR32Dimensions: 6 x 6 x 12 in
Weight: 2.33 pounds
AdCoatDimensions: 12 x 6 x 12 in
Weight: 19.55 pounds
FDC Rust Converter ULTRADimensions: 11.4 x 6 x 5.9 in
Weight: 8 pounds

1. VHT SP229 Rust Convertor


For many people, virtually any product spray application is the easiest and best way to use any product.

The VHT SP229 Rust Convertor may be one of the sample products to use, because it can be sprayed directly onto where you want it and leaves a clean, smooth finish where you apply it.

In addition, it is sprayed on a transparent surface and becomes a VQ SP229 Rust Convertor when applied to metal, it keep everything sprayed quickly.

It is made to be used in conjunction with hot metals but can withstand virtually anything when it is applied correctly.

Moreover, it can also prevent future rust from settling on the surface again.

In short, it is ideal for use in automotive connectors, turbine housings, exhaust systems or anything you would like to touch.

Pros /Cons
  • Can be applied directly to rusted areas
  • Eliminate the problem of future rust
  • After drying, it can be sanded to a smooth and even surface
  • Resist heat
  • Faulty cap?

2. Corroseal 82331 Water Based Rust Converter

Corroseal 82331 Water

This converter is the ideal solution for rusting problems in the marine, automotive and industrial sectors.

It uses this innovative chemical conversion formula to convert rust into a stable substance, or magnetite like others.

This rust-proof neutralizer can be applied and converted in one step.

In addition, these are water-based, non-flammable and non-corrosive primers; they require only soap and water to clean the material.

This converter acts as a primer and we specifically mention the effectiveness of this primer.

It is a high quality latex metal primer that is more environmentally friendly and economical than sandblasting.

Moreover, it is very easy to use.

Pros /Cons
  • Non-flammable, non-corrosive
  • Easy to clean up
  • Easy to apply
  • High quality latex primer
  • Time-consuming

3. KRUD KUTTER MR32 The Must For Rust

KRUD KUTTER MR32 The Must For Rust

KRUD KUTTER MR32 Must For Rust is a unique rust remover and inhibitor that prevents rust in one step.

The proprietary water-based formulation penetrates deeply into every void and rust inhibitor to resist the formation of future corrosion.

In addition, The trick is that it forms tiny rust-proof crystals that are integrated with the metal molecules.

If new etchants are formed, they will attach these crystals instead of metals.

Another advantage of KRUD KUTTER chemical rust remover is that it can create an ideal, clean surface for any primer, paint, skid, etc.

It removes the firm adhesion of the coating and does not rust underneath it.

But completely you can simply spray it, wait for the rust to loosen, and then wipe everything away.

It works on any surface and you don’t have to soak it in it. Therefore, this rust remover spray is ideal for small and large projects.

Pros /Cons
  • Non-corrosive
  • Non-toxic
  • Long lasting
  • Water-based
  • It’s available in small capacities only

4. AdCoat One step to Remove Rust Converter

AdCoat One step

AdCoat One step to Remove Rust Converter is basically a strong water-based, non-toxic and high-performance metal primer, which works well as a non-ferrous metal sealant on metal surfaces.

It reacts with rust and transforms. The rust is converted into a layer of magnetite, a black iron oxide mineral.

The mineral is said to be a rust-proof, chemically inert coating that protects against oxygen or moisture, thereby maintaining a smooth gloss and a dry black coating.

In high solids formulations, this treatment is also superior to other treatments and can be used to create a uniform surface.

Overall, it is compatible with most paints and topcoats.

Pros /Cons
  • Wonderful alloy primer
  • Hidden surface defects
  • Covers most paint
  • Water-based and non-toxic
  • A bit time consuming

5. FDC Rust Converter ULTRA

FDC Rust Converter ULTRA

This converter can turn a rusty surface into a dark protective polymer coating and preventing future rust and corrosion by locking all moisture.

The converter is effective during weather, rain, sun and salt spray without peeling or cracking.

This rust-preventing neutralizer acts as a long-lasting protective barrier with amazing coverage.

In addition to the irregular, porous and textured surface, it requires 500 square feet per gallon on a smooth, non-porous surface.

And also it dries in 20 minutes and requires 48 hours of cure time, which is quite less noticeable.

Besides, this converter is easy to be used as a brush or spray and can be cleaned instantly with soap and water.

Pros /Cons
  • Create a powerful barrier
  • Prevent future rusting
  • Easy to clean
  • Fine coverage
  • Stubborn rust may require more product

How to use rust converter on cars

In fact, it is very simple to use, you just need to spray it on the rust, and wipe it off after a while.

If you need complete steps, take a look at the video on Youtube.

How to prevent vehicles from rusting

Although the rust converter can remove rust, they are corrosive liquids that can cause some damage to our vehicles.

Therefore, if the vehicle is not very rusty, we do not recommend using the rust converters.

So, what should we do in the process of using the vehicle to avoid the vehicle being rusted?

3 ways to avoid rust:

  • Be wary of minor scratches: The surface of the paint is often rusted. In addition to the common collisions and scratches, the small stones that bouncing on the tires on the paint surface will hit the paint surface, which will cause the paint surface to peel off. Small rust spots.
  • Don’t park in wet places for a long time: If you stop in a humid place for a long time, it will easily lead to rusting of the vehicle. What is more serious is that the moisture is like the engine compartment, which may cause the engine or parts to rust.
  • Always use the vehicle: If you don’t use the car for a long time, not only the chassis, the brake pads are rusting, but also malfunctions.

Leave a Reply

Your email address will not be published. Required fields are marked *